This is a common guide for reflashing RockChip based devices. Hp Laserjet P2015dn Driver For Windows 10. All RK SoC supports the same applications and drivers for Host system.

Differences can be in hardware parts, so you need to detect OTG port and recovery buttons correctly. BEFORE START What you need: Image file Host PC USB OTG Cable Supported host OS: Windows XP (32/64bit) Windows 7 (32/64bit) Windows 8 (32/64bit) Windows 10 (32/64bit) The first thing you need is to download the archive with firmware. Inside archive, you find: BatchTool or Android Tool - tool for reflashing DriverAssitant - tool to install drivers and firmware image file Firmware image INSTALLING DRIVERS Launch RK DriverAssitant and press “Install Driver”. Apply all changes and warnings during installation until finishing message CONNECTING TO PC Run Batch tool or Android tool on your host PC. In order to connect device with Host PC and run bootloader mode you should perform following steps: 1.

Plug off device power adaptor. Connect device to computer via usb OTG port, much better to use certified OTG USB cable from package. Dell N5010 Bluetooth Driver Windows 10 here. Run Batch tool or RK Android tool 4. Lenovo Cd Dvd Driver Windows 10 more. Hold the hardware recovery button.

Plug in power adaptor and Turn on device if not turning on automatically. Tip: if you can’t hold recovery button or it’s broken you can reboot to bootloader from Ugoos power menu. RECOVERY BUTTONS AND OTG USB PORTS LOCATION ON UGOOS DEVICES YOU CAN SEE IN THE END OF THIS INSTRACTION. IF YOU USE ANDROID TOOL: In Android Tool choose “Upgrade Firmware” inset. If you did everything correctly and the RK driver installed properly on your computer, ANDROID TOOL shows you message “Found One Loader Device “ Click “Firmware” button and specify the path to the firmware file. You need to wait until the program download information about the firmware, then it will display report on the screen. Now click “Upgrade” button to start reflashing device.